News

Sprinter Diagnostic Software for X-431 Series V21.10

Date: 2018-07-27
Clicks: 161
Compared with the previous version: updates as following: Ⅰ. Summary Added basic functions, actuation test, special functions, coding, etc. for chassis 909 and 906 (2002-2013). Ⅱ. New Functions 1) Added basic functions and actuation test for the engine (CR4_NFZ) system under chassis 909. 2) Added basic functions and actuation test for the central control door lock system under chassis 909. 3) Added basic functions and actuation test for the E-Call_RU system under chassis 909. Control unit matching functions are as follows: reset control unit 4) Added basic functions and actuation test for the ESP system under chassis 909. Control unit matching functions are as follows: calibration of speed, lateral and longitudinal acceleration sensors and steering angle sensor 5) Added basic functions and actuation test for the heating control system under chassis 909. 6) Added basic functions and actuation test for the instrument cluster system under chassis 909. 7) Added basic functions and actuation test for the immobilizer system under chassis 909. 8) Added basic functions and actuation test for the auxiliary protective device system under chassis 909. 9) Added actuation test for the Tiptronic under chassis 901. Control unit matching functions are as follows: gear learning 10) Added actuation test for the auxiliary heating system under chassis 901. 11) Added actuation test for the auxiliary heater system under chassis 901. 12) Added the coding function for all systems under chassis 906 (2002-2013). 13) Added the functions Read Data Streams and actuation test for the diesel engine (CDID2/CDID3) under chassis 906 (as of 2013). Ⅲ. Optimized Functions None Ⅳ. Fixed Bugs 1) Rectified the failure to access the engine, SCR, etc. 2) Resolved the problem that the chassis 639 lacks the electronic gear selection module. Support products: X431 IV、Diagun III、X431 Pad、Matco PAD、X431-GDS I、X431-GDS II、X431 idiag、X431 V、X431 V+、X431V+ (2016)、X431V (2016)、X431 PRO、X431 PROS+、X431 PRO (2016)、X431 PRO3、X431 PRO3S、X431 PRO3S+、X431 PRO4、ScanPad071、ScanPad071 (2016)、ScanPad101、X431 PADIII、X431 PADIII (2017)、Golo Master、GoloMaster2、GoloMaster2Plus、EasyDiag2.0、CRP229、X431 PADII、X431 PADIID2、X431 PADIID3、X431 PAD IIA、X431 Torque 、EasyDiag For Android、Golo MobileDiag、golo easydiag+、Mdiag、Golo技师、Golo技师合并版、PRO MINI、CRP329、DIAGUN IV、PROLITE、MaxMe、Maximus2.0、Maximus_3、MaxGo、MaxGoA、X431 HTT、E-VIN、VinCube (2016)、AIT、AIT_PILE、CRP_429、PADIVD4、X431_HD2、X431 HD III、X431 HDIV、X431PADV、X431PADV_S、THROTTLE、X431PAD4D4、X431_EV、Gear HD、EasyDiag3、ZFSX1
Relevant Content
  • Hot
  • New
  • Media
Compared with the previous version: updates as following: Ⅰ. Outline Optimize the maintenance function of the 447, 448 chassis instrument system Ⅱ. Second, new features no Ⅲ. Third, optimize the funct...
2018 - 08 - 17
Compared with the previous version: updates as following: 1. Summary Optimized the functions including DTC and freeze frame reading. Corrected the time and date in freeze frames. 2. New Function None ...
2018 - 08 - 09
Compared with the previous version: updates as following: 1. Summary Optimized the functions including data stream reading,DTC and freeze frame reading. Corrected the time and date in freeze frames. 2...
2018 - 08 - 02
Compared with the previous version: updates as following: Ⅰ. Summary Added basic functions, actuation test, special functions, coding, etc. for chassis 909 and 906 (2002-2013). Ⅱ. New Functions 1) Add...
2018 - 07 - 27
Compared with the previous version: updates as following: 1. Summary Added the service function for the 918 and Cayenne-2010 systems. Added the freeze frame function for all Porsche models. Optimized ...
2018 - 07 - 24
元征微信 Focus on WeChat 元征微博 Enter Weibo
Service Call
4000-666-666
Focus on
Copyright ©2017 LAUNCH TECH CO.,LTD
犀牛云提供企业云服务