BENZ Diagnostic Software for X-431 Series V48.80
Date:
2017-09-21
Clicks:
266
Compared with the previous version:
updates as following:
Support products:
1. New functions
1). Added basic functions, actuation test, and control matching for new IDs of the PTCU system under chassis 222.
2). Added basic functions, actuation test and control matching functions for new IDs of the CDI system under chassis 222.
Control matching functions are as follows:
Configuration
Coding
Display of SCN
Display of CVN
Display of model check number
Teach-in process
B79/2(Transmission neutral position sensor)
Teach-in of throttle valve stop
Y74 (Pressure regulating valve)
Teach- in of intake port shutoff
Injector injection quantity adjustment
Resetting of contamination level of air filter
Oxidation catalytic converter
Activate fuel pump
G3/2 (Oxygen sensor upstream of catalytic converter)
Reset values of HFM drift compensation
Reset values of quantity mean value adaptation
Y27/7 (Exhaust gas recirculation actuator, low pressure)
Y94 (Quantity control valve)
Y129 (AdBlue(R) metering valve)
Reset learned values of components 'NOx sensor upstream of SCR catalytic converter' and 'NOx downstream of SCR catalytic converter'
Reset learned values for AdBlue(R) metering
B16/15 (Temperature sensor upstream of SCR catalytic converter)
Teach-in process after replacement of component 'SCR catalytic converter'
Enabling of engine start after crash event
3). Added basic functions, actuation test, and control matching of the Audio or Cab Management and Data System under chassis 166ML.
Control matching functions are as follows:
Configuration
Manual settings
Setting language
Run-on time after switching off ignition
Perform control unit reset.
Entwicklerdaten (Developers data)
Frequency readout
Einstellen ob Reset gemecht wird (nur Entwicklerdaten)
4). Added basic functions for new IDs of the EZS (Electronic Ignition System) under chassis 222.
5). Added basic functions and actuation test for new IDs of the HFPM (haptic accelerator pedal module) system under chassis 222.
6). Added basic functions and control matching for new IDs of the MPM (multi-function control unit) system under chassis 222.
Control matching functions are as follows:
Configuration
Manual settings
Anpassung: Standard coding
Restoration of communication with the control unit
Control unit reset
7). Added basic functions, actuation test, and control matching for new IDs of the Left Rear ESE system under chassis 222.
Control matching functions are as follows:
Teach-in processes
Normalization
8). Added basic functions, actuation test, and control matching for new IDs of the Right Rear ESE system under chassis 222.
Control matching functions are as follows:
Teach-in processes
Normalization
9). Added basic functions for new ID of the ISM (shift module) under chassis 222.
10). Added basic functions for new IDs of the SG-EM system under chassis 222.
11). Added the function Read Data Steams for the ECM engine system under chassis 222.
12). Added basic functions for new IDs Electric Powering (ES) system under chassis 222.
13). Added basic functions for new IDs of the Anti-crash Assist (SG-AWF) system under chassis 222.
14). Added basic functions for new IDs of the Camera Cover (KAB) system under chassis 222.
15). Added basic functions for new IDs of the Night View Assist (NSA) system under chassis 222.
16). Added basic functions for new IDs of the Reversing Camera (RFK) system under chassis 222.
17). Added basic functions for new IDs of the Radar Sensor Control Unit (SGR) under chassis 222.
18). Added basic functions for new IDs of the DISTRONIC system under chassis 222.
19). Added basic functions for new IDs of the Multi-function Camera (MFK) system under chassis 222.
20). Added basic functions for new IDs of the Rear Passenger Area Left Display (D_FOL) under chassis 222.
21). Added basic functions for new IDs of the Rear Passenger Area Right Display (D_FOR) under chassis 222.
22). Added basic functions for new IDs of the Head-up Display under chassis 222.
23). Added basic functions for new IDs of the Instrument Cluster (IC) under chassis 222.
24). Added basic functions for new IDs of the Touch Pad (TPAD) system under chassis 222.
25). Added basic functions for new IDs of the Driver Electric Seat Adjustment (ESA Driver) system under chassis 222.
26). Added basic functions for new IDs of the Front Passenger Electric Seat Adjustment (ESA Front passenger) system under chassis 222.
27). Added basic functions for new IDs of the FL Multicontour system (MKS-LF) under chassis 222.
28). Added basic functions for new IDs of the FR Multicontour system (MKS-RF) under chassis 222.
29). Added basic functions for new IDs of the RL Multicontour system (MKS-LR) under chassis 222.
30). Added basic functions for b new IDs of the RR Multicontour system (MKS-RR) under chassis 222.
31). Added basic functions for new ID of the Multicontour Pneumatic Pump (PPMKS) under chassis 222.
32). Added basic functions for new IDs of the Tailgate Control (HKS) system under chassis 222.
33). Added basic functions for new IDs of the FR Door system (DCU-RF) under chassis 222.
34). Added basic functions for new IDs of the FL Door system (DCU-LF) under chassis 222.
35). Added basic functions for new IDs of the RL Door system (DCU-LR) under chassis 222.
36). Added basic functions for new IDs of the RR Door system (DCU-RR) under chassis 222.
37). Added the functions Read Version Information, Read DTCs, and Clear DTCs for new IDs of all systems under chassis 213 and 238.
38). Added basic functions and actuation test for new IDs of the IC system under chassis 213.
39). Added actuation test and matching function for the Diesel Engine system under chassis 117.
40). updated the functions Read Version Information, Read DTCs, and Clear DTCs for the Type of Drive menu system protocols (including CDI, PTCU, HFPM, FSCU, ISM, SG-EM, SCR) under chassis 205.
41). updated the functions Read Version Information, Read DTCs, and Clear DTCs for the Chassis menu system protocols (including ADS,SG-AMGL,ES,ESP) under chassis 205.
42). updated the functions Read Version Information, Read DTCs, and Clear DTCs for the Drive Assistance System menu system protocols (including SG-AWF,KAB,DTR,IRS-HLA,IRS-HRA,RFK,SGR,360°camera,TPM) under chassis 205.
43). updated the functions Read Version Information, Read DTCs, and Clear DTCs for the Body menu system protocols (including PSD,RevETR-LF,RevETR-RF,BMS,SD,SG_LG,Trailer-recognition,Rear-SAM,Driver, SG-SW_R, SG-SW_L, EZS) under chassis 205.
44). updated the functions Read Version Information, Read DTCs, and Clear DTCs for the Information menu system protocols (including IC,TPAD) under chassis 205.
45). updated the functions Read Version Information, Read DTCs, and Clear DTCs for the Seat and Door menu system protocols (including ESA, Front passenger) under chassis 205.
46). updated the functions Read Version Information, Read DTCs, and Clear DTCs for the Air Conditioning menu system protocols (including AAC) under chassis 205.
47). updated basic functions, actuation test, and matching functions for new ID of the AGS under chassis 222.
Matching functions are as follows:
Configuration
Manual settings
Replace component 'M64/1(Left rear seat active belt buckle motor)'
Replace component 'M64/2(Right rear seat active belt buckle motor)'
48). updated basic functions, actuation test, and matching functions for new ID of the BMS under chassis 222.
Matching functions are as follows:
Coding
Display of SCN
Display of CVN
Teach-in process
High-voltage component lock
49). updated basic functions and actuation test for new ID of the DC/DC under chassis 222.
50). updated actuation test for the ATA under chassis 222.
51). updated all actuation test functions for new ID of the FLANFS system under chassis 222.
52). updated basic functions, actuation test, and matching functions for new IDs of the SG - SW – L under chassis 222.
Matching functions are as follows:
Configuration
Coding
Display of coding of data
Teach-in processes
Adaptation data
Resetting of assignment of control unit 'E1n9' to vehicle side
Calibration processes
Zero position adjustment
Operating hours counter
Resetting of operating hours counters of component 'E1 (Left front lamp unit)'
53). updated basic functions, actuation test, and matching functions for new IDs of the SG - SW - R under chassis 222.
Matching functions are as follows:
Configuration
Coding
Display of coding of data
Teach-in processes
Adaptation data
Resetting of assignment of control unit 'E2n9' to vehicle side
Operating hours counter
Resetting of operating hours counters of component 'E2 (Right front lamp unit)'
54). updated basic functions for new IDs of the KG under chassis 222.
55). updated basic functions and actuation test for new IDs of the SCM under chassis 222.
56). updated basic functions, actuation test, and matching functions for all IDs of the SG - LG under chassis 222.
Matching functions are as follows:
Configuration
Coding
Display of coding data
Display of SCN
Display of CVN
57). updated data stream algorithm, actuation test and matching functions of the PSD under chassis 222,.
Matching functions are as follows:
Configuration
Manual setting
Speed-dependent tilt adjustment
Teach-in processes
Teach-in process of anti-pinch protection
58). updated basic functions and actuation test of the RevETR-LF under chassis 222,
59). updated basic functions and actuation test of the RevETR-RF under chassis 222,
60). updated basic functions and actuation test of the Driver-side SAM under chassis 222.
61). updated basic functions and actuation test of the REAR SAM under chassis 222.
62). updated basic functions, actuation test, and matching functions of the SG-SOGE-E under chassis 222.
Matching functions are as follows:
Configuration
Coding
Display of coding
63). updated basic functions and actuation test of SRS under chassis 222.
64). updated basic functions, actuation test, and matching function of the Trailer Recognition Module under chassis 222,.
Matching functions are as follows:
Teach-in processes
Initialization
Erasing of initialization values
65). updated basic functions and actuation test of the ESA Front passenger under chassis 117.
66). updated basic functions and actuation test of the ESA Driver under chassis 117.
67). updated basic functions, actuation test, and matching functions of the DCU-LF under chassis 117.
Matching functions are as follows:
Teach-in processes
Normalization of power window
68). updated basic functions, actuation test, and matching functions of the DCU-RF under chassis 117.
Matching functions are as follows:
Teach-in processes
Normalization of power window
69). updated basic functions of the Diesel Engine under chassis 253.
70). updated basic functions, actuation test, and matching functions for the Gasoline Engine under chassis 253.
MED40 engine matching functions:
Configuration
Coding
Display of SCN
Display of CVN
Display of model check number
Manual setting
Correction programming of ignition
Correction programming of fuel quantity
Correction programming of specified idle speed in selector lever position 'P' or 'N'
Correction programming of specified idle speed
Correction programming of specified idle speed with gear range engaged
Injector injection quantity adjustment
Teach-in process
Activation of fuel pump
Teach-in of throttle valve stop
Teach-in of exhaust gas recirculation actuator
Teach-in positions for camshafts
B79/3(Manual transmission main shifter shaft position sensor)
Teaching in the ethanol proportion in the fuel
Resetting reading of frequency counter for ethanol teach-in processes
Resetting of adaptation values
Status of teach-in process
Perform teach-in process 'Sensor rotor adaptation'
Enabling of engine start after crash event
MED177 engine matching functions:
Configuration
Coding
Display of SCN
Display of CVN
Display of model check number
Manual settings
Correction programming of ignition
Correction programming of fuel quantity
Correction programming of specified idle speed in selector lever position 'P' or 'N'
Correction programming of specified idle speed with gear range engaged
Injector injection quantity adjustment
Teach-in processes
Activation of fuel pump
Teach in of throttle valve stop
Teach-in of exhaust gas recirculation actuators
Teaching in the ethanol proportion in the fuel
Resetting of adaptation values
Resetting reading of frequency counter for ethanol teach-in processes
Teach-in process after replacement of the combustion engine
Enabling of engine start after crash event
2. Optimized functions
null
3.Fixed bugs
null
X431 V、X431 V+、X431V+(2016)、X431V(2016)、X431 Pro、 X431 PRO(2016)、X431 PRO3、X431 PRO3S、 X431 PRO4、ScanPad071、ScanPad101、X431 PADII、CRP229、EasyDiag2.0、EasyDiag For Android、GOLO技师、GOLO技师合并版、X431 PADIII、GOLO easydiag +、HD2、X431 PROS、PRO MINI、CRP329、DIAGUN IV、MaxMe、Maximus2.0、MaxGo、EVIN、X431 AIT