NISSAN Diagnostic Software for X-431 Series V43.80
Date：
2018-05-22
Clicks:
248
Compared with the previous version: updates as following: 1.Summary Newly added the Fast learn the zero correction value at idle, Fast learn the zero correction value while driving, DPF regeneration and Calibrate camera images functions for 2010-2018 Infiniti QX30, Q50, Sylphy, Teana, and Tiida models , etc;Newly added the Target ignition timing adjustment, Target idle speed adjustment, Clutch gear position learning, and delete gear position learned value functions, etc. for 2007-2018 Nissan GTR. 2. New Functions 1) Newly added the Learning of inlet shut-off, Fast learning of zero correction value at idle, Reset of A/F ratio, Fast learning of zero correction value while driving, and DPF regeneration functions, etc. for 2013-2018 Infiniti QX30, Q50, Q60, and Q70, etc; 2) Newly added the Fuel pressure release, Self-learn control value, Target ignition timing adjustment, Target idle speed adjustment, Clutch gear position learning, Disengage gear, Read clutch gear position learning data, delete gear position learned value, delete clutch A learned value, delete clutch B learned value, Write previous clutch learned value, and Clear clutch engaged pressure correction value functions, etc. for 2007-2018 Nissan GTR; 3) Newly added the Misfire counts (Real-time), Misfirecounts (Past), and Calibrate camera images functions, etc. for 2010-2018 Sylphy, Teana, Qashqai, Tiida, and X-Trail models. 3. Optimized Functions 1) Optimized the name display for parts of systems, and changed the abbreviations of parts of system names into full names; 2) Optimized the DTCs functions, improved the meaning of the DTCs to make the DTC content clear and simple. 4. Fixed Bugs 1) Solved the problem that the engine MIL was on, but there was no DTCs can be read out on 2014 Infiniti QX56 model; 2) Solved the problem which is failed to perform the Clear DTC function under the radar laser system on the 2016 Infiniti QX60 hybrid model; 3) Solved the problem that the learned values of gearbox system hadn't been cleared on 2016 Nissan Livina model; 4) Solved the problem which is failed to enter the ABS of the 2010 ALTIMA hybrid model; 5) Solved the problem which is failed to perform the zero calibration function under the occupancy detection system of 2017 QASHQAI model; 6) Solved the problem which is failed to perform the throttle stop learning under the engine system of 2017 Infiniti QX30 model; 7) Solved the problem that the unit is error for the data stream Intake tuning valve timing (Group 1) under the engine system of 2010 Teana model; 8) Fixed the problem that the number of system DTCs is displayed as 0 when returning to the quick test interface after entering the system operation from the quick test interface. Support products： X431 V、X431 V+、X431V+ (2016)、X431V (2016)、X431 PRO、X431 PROS+、X431 PRO (2016)、X431 PRO3、X431 PRO3S、X431 PRO3S+、X431 PRO4、ScanPad071、ScanPad071 (2016)、ScanPad101、X431 PADIII、X431 PADIII (2017)、Golo Master、GoloMaster2、GoloMaster2Plus、EasyDiag2.0、CRP229、X431 PADII、X431 PADIID2、X431 PADIID3、X431 PAD IIA、X431 Torque 、EasyDiag For Android、Golo MobileDiag、golo easydiag+、Mdiag、Golo技师、Golo技师合并版、PRO MINI、CRP329、DIAGUN IV、PROLITE、MaxMe、Maximus2.0、Maximus3.0、MaxGo、MaxGoA、X431PADIID3、X431 HTT、E-VIN、VinCube (2016)、AIT、AIT_PILE、CRP_429、PADIVD4、X431 Pad,Matco PAD,X431-GDS I,X431-GDS II, X431 idiag, Diagun III、X431 HDIV、X431_HD2